100
Basic settings in the Control Center
CasaConnect KNX Control Center
• Version: 13.09.2021 • Technical changes and errors excepted.
5.3.6. Internet
The
CasaConnect KNX Control Center
is internet-ready and can be connected to a
network by cable (Ethernet/LAN) or WiFi (WLAN).
System > System settings> Internet
The network connection is needed for:
•
Use of Apps (with smartphones and tablets in the same network/WLAN)
If the
CasaConnect KNX
is also connected to the internet via the internal network,
the following functions are also possible:
•
Accessing web contents in the control center' browser (also e.g. streaming)
•
Remote access (e.g. for system set-up, diagnosis)
The Ethernet/LAN connection socket can be reached after the display has been accept-
ed. Note the information regarding assembly.
Protect your network with the latest encryption technology and
change passwords regularly!
Connection status
Shows the current status (disconnected or connected).
Connection type
Shows the type of connection (Ethernet or WLAN). Tap the field to set up the connec-
tion.
WLAN: Wireless connection. If WLAN has been confirmed, the additional field "Net-
work name" is displayed for the additional set up.
Ethernet: Cable connection via the LAN socket on the circuit board. No further settings
necessary.
Network name (SSID)
The network is selected and set up here under the setting WLAN. Enter a network name
or touch "Find networks" in order to see all the available networks.
Create connection (button at top right)
You can only "Create connection" using this touch field once a network has been se-
lected. The password for the network is requested.
If required, you can disconnect the connection again using the same button.
