20
Operation
CasaConnect KNX Control Center
• Version: 13.09.2021 • Technical changes and errors excepted.
2.2.
The touch display
The manual controls and the default setting of the automatic functions and the basic
setting are performed via the permanently installed touch display of the control center.
The button surfaces are actuated by pressing the display in the respective area. If a but-
ton is pressed, there is optical feedback and a brief audio signal is emitted. The key
tone can be switched off.
System > System settings > Settings > Key tone
5.3.1. Settings > Switch off/on key tone, Page 94
Operating the display with long fingernails will not damage the display screen or the
touch function. Touching with very hard and pointed objects (e.g. made from glass,
gemstone or metal) should be avoided because this can cause scratches.
2.3.
Operate motors and devices manually
The start menu is on the left of the start page. Selected
Favourites
for the manual op-
eration and the websites saved as bookmarks can be displayed beneath the system ad
manual menu button. So that a motor/device is displayed in as a favourite, the display
has to be activated in the setting "Manual menu" in the installation settings.
You can change the display sequence in the start menu:
System > Set screen > > Start page
5.2.4. Start page
2.3.1. The manual menu
Start menu > Manual
The page for manual operation is reached via the
Manual menu
button on the start
page.
So that a motor/device is displayed here, the display has to be activated in the setting
"Manual menu" in the installation settings. Motors/devices, scenes and group buttons
are displayed either singly or as subject groups.
Motors or devices with the same function (e.g. all blinds in a room) are aggregated in
a
group button
. These motors/devices are also operated with the button.
5.2.2. Assign group buttons, Page 82
Different functions are collated in a
subject group
in order to create more overview
in the manual menu. The following groups are available:
•
Central function: for group keys and scenes
•
All visible functions: all functions that have been activated in the manual menu
•
Room control: for heatings, air-conditioning and fans
•
Floors: for different floors in a building
(Individual rooms can also be defined per floor)
•
Output for motors and devices
