51
Parameter setting
Weather Station Suntracer KNX sl basic
• Version: 11.03.2016 • Technical changes and errors excepted.
Set the switching on and off times and the days of the week for this period. If, for ex-
ample, 15:35 is set as the switch-off time, the output switches off on the change from
15:35 to 15:36.
Set the send pattern for the week clock switch output and the value of the output.
Period that can be switched externally (time period is the input)
The time switches are taken over from an external timer switch. Set at which value the
period is to be active and define the object value before the first communication.
6.13. Calendar timer
In the calendar timer in the device, four periods with two switching sequences can be
defined.
Activate the required periods for the calendar timer. The menus for the further setting
of the computer are then loaded.
Switch on time (hours)
0 … 23
Switch on time (minutes)
0 … 59
Switch-off time (hours)
0 … 23
Switch-off time (minutes)
0 … 59
Period switches to
Monday ... Sunday
No • Yes
Switching output sends
• never
• on change
• on change to active
• on change to inactive
• on change and periodically
• on change to active and periodically
• on change to inactive and periodically
Send cycle
(if sent periodically)
5 s ... 2 h; 10 s
8-bit output value if
Period active
0 ... 255
8-bit output value if
Period not active
0 ... 255
Period is active
• at object value = 1
• at object value = 0
Object value prior to initial communication
0 • 1
Use period 1
No • Yes
Use period ...
No • Yes
Use period 4
No • Yes
