background image

Weather Station P03/3-RS485 • Version: 11.10.2011 • Subject to technical alterations. Errors excepted. 

Byte 

No. 

Char 

Meaning 

 

21 

Rain 

Rain: J = Yes; N = No 

 

22 

Weekday: 1-7 

Weekday: 1 = Mo, 7  = Su 

 

23 

Date: Day 1st digit 

Date: Day 1st digit (tens) 

 

24 

Date: Day 2nd digit 

Date: Day 2nd digit (ones) 

 

25 

Date: Month 1st digit 

Date: Month 1st digit (tens) 

 

26 

Date: Month 2nd digit 

Date: Month 2nd digit (ones) 

 

27 

Date: Year 1st digit 

Date: Year 1st digit (tens) 

 

28 

Date: Year 2nd digit 

Date: Year 2nd digit (ones) 

 

29 

Time: Hrs. 1st digit 

Time: Hrs. 1st digit (tens) 

 

30 

Time: Hrs. 2nd digit 

Time: Hrs. 2nd digit (ones) 

 

31 

Time: Min. 1st digit 

Time: Min. 1st digit (tens) 

 

32 

Time: Min. 2nd digit 

Time: Min. 2nd digit (ones) 

 

33 

Time: Sec. 1st digit 

Time: Sec. 1st digit (tens) 

 

34 

Time: Sec. 2nd digit 

Time: Sec. 2nd digit (ones) 

 

35 

Summertime 

J = Summertime  N = Wintertime  

? = Not defined 

 

36 

Checksum: 1st digit 

Checksum 1st digit (thousands) 

 

37 

Checksum: 2nd digit 

Checksum 2nd digit (hundreds) 

 

38 

Checksum: 3rd digit 

Checksum 3rd digit (tens) 

 

39  

Checksum: 4th digit 

Checksum 4th digit (ones) 

 

40  

End 

End 0x03 

 

 

Installation and first use 

 

The weather station may only be installed, tested, put into  

operation and troubleshot by a person qualified to do so. 

 

When connecting the weather station, do not connect any live wires (switch off the 

mains fuse first) and take precautionary measures to prevent them from being 

accidentally switched back on. Make sure all connections are correct. An incorrect 

connection could destroy the weather station or any electronic devices connected to it.  

 

The weather station must be used for its intended purpose only. Any improper 

modification or failure to observe the operation instructions will void all guarantees or 

claims to warranty. 

When unpacking, check the unit immediately for any mechanical damage. The supplier 

must be informed immediately of any damage caused during transport. 

 

The weather station must not be put into use if  

damaged.  

 

Summary of Contents for P03/3-RS485













Reviews: