![background image](http://html1.mh-extra.com/html/elsner-elektronik/knx-rw/knx-rw_technical-specifications-and-installation-instructions_2396607007.webp)
7
Installation and commissioning
Rain/Wind Sensor KNX RW
• Date of issue: 05.11.2010 • Technical changes reserved. Errors reserved.
2.3.3. Preparing the sensor
The sensor cover snaps in on the left and right along the bottom edge (see Fig.). Re-
move the cover. Proceed carefully, so as not to pull off the wire connecting the PCB in
the bottom part with the rain sensor in the cover (soldered cable connection in case of
230 V AC version, cable with plug in case of 24 V DC version).
Fig. 9
1
Cover with rain sensor
2) Cover Snaps
3
Bottom part of housing
2
3
Unsnap cover and
remove upwards
1