elsner elektronik KNX RF-MSG-DST, Installation And Adjustment

Page: 18 / 26

16 Parameter setting
Radio actuator KNX RF MSG-DST Version: 27.06.2018 • Technical changes and errors excepted.
Use movement limit 1/2:
The movement limits are activated here, and can then be configured in their own menu
items. See “Movement limits” on page 20.
Short time restriction (for blinds):
If short time restriction is active, only short time movement commands are still possib-
le manually. If the function "Allow step commands only for blind adjustment" is activa-
ted simultaneously, (siehe
Drive - Shutter, Blind, Awning, Window , page 12) only the
slats can still be adjusted by hand but no longer the movement position of the shutter.
Restriction is active for object value 1.
Use block 3 • no
• yes, with blocking object
• yes, as wind blocking
• yes, as rain blocking
Use block 4 • no
• yes, with blocking object
• yes, as wind blocking
• yes, as rain blocking
Use Block 5 (low priority) • no
• yes, with blocking object
• yes, as wind blocking
• yes, as rain blocking
Priority is • Block 5 over Manual
• Manual over Block 5
Use monitoring of blocking objects No • Yes
Monitoring period for blocking objects
(only if using monitoring of the blocking
objects)
5s... • 2 h; 5 min
Behaviour if a blocking object is not
received
(only if blocking object monitoring is used)
• Stop
• Up command • Down command
(Shutters/roller blinds)
• On command • Off command
(Awnings)
• Close command • Open command
(Windows)
Use short time limit no • yes
Value of the object in front of 1.
Communication and bus voltage
restoration
(if short time restriction is used)
0 • 1