Power Supply Systems KNX PS640 and KNX PS640 USB
2
Power Supply Systems KNX PS640 and KNX PS640 USB
• Version: 19.08.2020 • Technical changes and errors excepted. • Elsner Elektronik GmbH • Sohlengrund 16 • 75395 Ostelsheim • Germany • www.elsner-elektronik.de •
Technical Service: +49 (0) 7033 / 30945-250
Press key
once more in order to get into the sector „Line reset“.
Move the cursor (flashing rectangle at right edge) to the desired setting with the
keys
or
and confirm with key
ok
.
With key
, you return to the previous menu level.
3.4. Data memory
Standard screen:
Press key once.
Move the cursor (flashing rectangle at right edge) to the „Data memory“ menu with
the keys
and
and confirm with key
.
Move the cursor to the desired menu with the up and down keys and press key
.
3.4.1. Operating hours
3.4.2. Overload
3.4.3. External Overvoltage
3.4.4. Internal Overvoltage
3.4.5. Short Circuit
3.4.6. Excess Temperature
3.5. Operating data
Standard screen:
Press key once.
Move the cursor (flashing rectangle at right edge) to the „Operating Data“ menu
with the keys
and
and confirm with key
.
The current values of
• Bus voltage
• Bus current
• Temperature on the circuit board of the device
are displayed.
With key
you return to the previous menu level.
3.6. Language
Standard screen:
Press key once.
Move the cursor (flashing rectangle at right edge) to the „Language“ menu with the
keys
and
and confirm with key
.
Move the cursor to the desired language with the up and down keys and press the
key
ok
. The display automatically jumps to the previous menu in the desired langua
-
ge. With key
you get back by one menu level to the basic setting.
4.
Disposal
After use, the device must be disposed of or recycled in accordance with the legal
regulations. Do not dispose of it with the household waste!
Yes
Reset is activated. The line is switched to neutral and
shorted. The basic setting displays: „Reset is active!“
No
Reset not activated. The power supply system works in
normal operation.
30 seconds
A reset of 30 seconds is started. Afterwards, the line is
supplied with voltage as usual. During the reset state,
which lasts 30 seconds, the basic setting displays:
„Reset active: XX sec“ (countdown).
Reset: Yes ™
No
30 seconds
Reset not active!
elsner elektronik
KNX Power Supply
Normal Operation
Diagnostics >
Line Reset
>
Data Memory
> ™
Operating Data >
Language
>
Hours ofOperation > ™
Overload
>
Ext. Overvoltage >
Int. Overvoltage >
Short circuit
>
Excess Temperat. >
Run time: 0 years
0 day 0 hrs.
< = Back
The operating hours of the power supply system are
displayed in years, days and hours.
With key
you return to the previous menu level.
Run time: 0 years
0 day 0 hrs.
< = Back
The number of overload incidents and the total time
in days, hours and minutes are displayed.
With key
you return to the previous menu level.
External Overvoltage
was detected
0 times.
< = Back
The number of external overvoltage incidents is di
-
splayed.
With key
you return to the previous menu level.
Internal Overvoltage
was detected
0 times.
< = Back
The number of internal overvoltage incidents is di
-
splayed.
With key
you return to the previous menu level.
A short at the bus was
detected
0 times.
< = Back
The number of short circuit incidents at the bus is di
-
splayed.
With key
you return to the previous menu level.
Excess Temperature on
the board
was detected
0 times!
The number of excess temperature incidents on the
circuit board of the device is displayed.
With key
you return to the previous menu level.
elsner elektronik
KNX Power Supply
Normal Operation
Diagnostics >
Line Reset
>
Data Memory
>
Operating Data > ™
Language
>
Bus Voltage 29.4 V
Bus Current 320 mA
Temperature 42.1°C
elsner elektronik
KNX Power Supply
Normal Operation
Diagnostics >
Line Reset
>
Data Memory
>
Operating Data >
Language
> ™
Sprache
:Deutsch ™
Language :English
Idioma
:Espanol
Taal
:Hollands
