6
Installation and start-up
KNX K8 actuator
• Version: 26.02.2016 • Technical Changes and Errors excepted.
Buttons
LEDs
Behaviour of the LEDs for the output channels
in Automatic mode:
in Manual mode:
brief button press (<0,5 s)
LED shows current status (see ETS parameter: Channel
LED)
button press >0,5 s
in Automatic mode:
Switching to Manual mode
in Manal mode:
Switching from manually ON to
manually OFF and reverse
long button press (>3 s)
Switching to Automatic mode (when activated in ETS)
Off
Actuating variable = 0%
On
Actuating variable > 0%
Flashes slowly
Manually OFF
Flashes fast
Manually ON
