30
KNX Interface for WS1000
• Status: 15.04.2016 • Errors excepted. Subject to technical changes.
Bus communication of wireless ventilation units
If wireless ventilation units are switched to level 1 of air extraction, the flap is open but
the blower stands still. Air extraction level = 12.5% is transmit on the bus.
Manual WS1000, 3.1.7. Setting ventilation automation, Ventilation levels of wireless ventilators
Blocks with 3 objects
The menu point appears only if the option that blocks with 3 objects should be used
has been selected with "Functional blocks".
The data for dimmers and 3-way combination sensors (temperature, humidity and
CO2) is transmitted with the help of these 10 blocks. The blocks are also suitable for
light, buttons, thermal hygrometer, temperature sensors and floating point values.
In "Functional Blocks", the option selected is:
Blocks with 2 objects
The menu point appears only if the option that blocks with 2 objects should be used
has been selected with "Functional blocks".
The data for light, buttons and the thermal hygrometer is transmitted with the help of
these 10 blocks. The blocks are also suitable for temperature sensors and floating point
values.
In "Functional Blocks", the option selected is:
Use blocks with 3 objects
Yes
Block 3_1
… Block 3_10
• Do not use
• Output: Light switchable
• Output: Light dimmable
• Input: Up/down key
• Input: On/Off key
• Input: Temperature
• Input: Temperature, humidity
• Input: Temperature, humidity, CO2
• Input: 2 byte floating point
• Input: 4 byte floating point
Use blocks with 2 objects
Yes
Block 2_1
… Block 2_10
• Do not use
• Output: Light switchable
• Input: Up/down key
• Input: On/Off key
• Input: Temperature
• Input: Temperature, humidity
• Input: 2 byte floating point
• Input: 4 byte floating point
