24
KNX Interface for WS1000
• Status: 15.04.2016 • Errors excepted. Subject to technical changes.
2.5.
Parameter setting
Malfunctions and error messages
Malfunction/Defect of the KNX interface:
•
In the display unit of the
KNX Interface
, the message "KNX interface defect"
is displayed instead of the weather animation.
•
No communication with the bus takes place.
•
If it is configured in the ETS that the weather data needs to be received from
the bus, a wind or rain alarm is triggered to the controller.
Malfunction/Defect of the controller KNX Interface
(KNX interface does not
receive any message from the controller for 30 seconds):
•
A fault warning is transmitted to the bus.
Malfunction/Defect of a
KNX sensor or actuator
that has already been
configured
(no data reception):
•
In the manual menu of the
KNX Interface
, the message "No measured values
received" or "Position unknown" or "Defect" is displayed for the bus subscriber.
2.5.1. General settings
