![background image](http://html.mh-extra.com/html/elsner-elektronik/intra-sewi-knx-l-pr/intra-sewi-knx-l-pr_installation-and-adjustment_2396696010.webp)
10
Installation and start-up
Sensors Intra-Sewi KNX TH-L-Pr and Intra-Sewi KNX L-Pr
• Version: 30.08.2018 • Technical changes and errors excepted.
Elsner Elektronik is not liable for any changes in norms and standards which may occur
after publication of these operating instructions.
2.2. Installation location
Install and use only in dry interior rooms!
Avoid condensation.
The Sensor is installed in a false ceiling or a standard connection socket (Ø 60 mm, 42
mm deep).
The device must be installed on the ceiling, so that the
movement capturing
takes
place from above. Make sure that the desired area is covered by the sensor's coverage
angle and that no obstacles obstruct the recording.
When selecting an installation location for
Intra-Sewi KNX TH-L-Pr
, please ensure
that the measurement results of
temperature and humidity
are affected as little as
possible by external influences. Possible sources of interference include:
•
Direct sunlight
•
Drafts from windows and doors
•
Draughts from ducts coming from other rooms or the outdoors
•
Warming or cooling of the building structure on which the sensor is mounted,
e.g. due to sunlight, heating or cold water pipes
•
Connection lines and empty ducts which lead from warmer or colder areas to
the sensor
Measurement variations from such sources of interference must be corrected in the
ETS in order to ensure the specified accuracy of the sensor (offset).
2.2.1. Coverage area of the motion detector
Angle of coverage: approx. 94° × 82°
Range: approx. 5 m
Summary of Contents for Intra-Sewi KNX L-Pr
Page 2: ......
Page 6: ...6 Clarification of signs ...