SO250-UI Tank Sensor | Version 18.08.2015 | Data subject to alteration. Errors subject to correction.
12
Settings for all tank shapes
Use the
and keys to select the distance of the
sensor from the liquid when the tank is full (12 to 200
cm). Confirm your selection using the key.
Use the and keys to select how many of the
described tanks are included in the battery (1 to 100
tanks). Confirm your selection using the key.
Move the cursor to the desired setting using the or
keys. The SO250-UI can indicate the fluid content
of the tank in litres (l) cubic meters (m³) or percent
(%). Confirm your selection using the key.
Use the
and
keys to set the desired time interval
for your measurements.
Settings options: From 1 s to 9 s in one-second increments, from 10 s to 50 s in ten-
second increments, from 1 min to 120 min in 10-minute increments.
Confirm your selection using the key. You will automatically return to the main menu.
Interfaces
Main menu:
or
Press the key once to access the “Settings” area.
Move the cursor (the blinking rectangle on the right)
to the “Interface” menu item using the and keys,
and press the key.
The selection menu for the different interfaces
appears.
SO250-UI Tank Sensor
Tank content:
4885 litres
Settings >
SO250-UI Tank Sensor
Distance: 59.4cm
Settings >
Sensor distance from
liquid when tank is
full:
15cm™
Number of tanks in
battery:
2 Tanks ™
Display in litres >™
Display in m
3
>
Display in %
>
Measurement
frequency?
Once every 8 secs.™
Distance measurem >
Content measurem >
Interfaces >
™
Acoustic signal
>v
Modbus settings
>
Current output
>
Voltage output
>
Relay settings
>
