22
Setting parameters
Temperature Sensor KNX T-AP
• Version: 27.01.2020 • Errors excepted. Subject to technical changes.
Set the starting values for various situations:
If the
logic output sends one 1-bit object
:
If the
logic output sends two 8-bit objects
:
Set the output send pattern.
6.6.2. AND logic connection inputs
1. / 2. / 3. / 4. Input
• do not use
- Communication object logic inputs 1...8
- Communication object logic inputs 1...8
inverted
• all switching events that the device
provides
(see the chapter
Connection inputs for AND
or OR logic
)
Logic output sends
• never sends
• sends one 1-bit object
• sends two 8-bit objects
If logic = 1 ==> object value
1 • 0
If logic = 0 ==> object value
1 • 0
If logic = 1 ==> Object A value
0 … 255; 127
if logic = 1 ==> object B value
0 … 255
If logic = 0 ==> Object A value
0 … 255; 127
If logic = 0 ==> Object B value
0 … 255
Communication object logic X sends
• on change of logic
• on change of logic to 1
• on change of logic to 0
• on change of logic and periodically
• on change of logic to 1 and periodically
• on change of logic to 0 and periodically
Send periodically every
(if sent periodically)
5 s • 10 s • 30 s… • 2 h
Do not use
Communication object logic input 1
Communication object logic input 1 inverted
Communication object logic input 2
Communication object logic input 2 inverted
Communication object logic input 3
Communication object logic input 3 inverted
Communication object logic input 4
Communication object logic input 4 inverted
