25
Setting of parameters
Weather Station Suntracer KNX-GPS light
• Version: 30.09.2020 • Technical changes reserved. Errors reserved.
For the initial operation, date and time must be sent directly one after the other in order
that the clock of the device can start.
7.2. Location
The position is received via GPS! The following settings are used during first
commissioning as long as there is still no GPS reception.
The indication of the location is necessary for the calculation of the position of the sun
with the help of date and time.
If the location is determined by the coordinates of a given city:
If the location is determined by entry of coordinates:
Function of dadio LED
• Display cycles tuned to seconds
• always OFF
Time zone
UTC-1 • UTC • UTC+1 • UTC+2 • UTC+3
Switching outputs cyclically send all
5 sec • 10 sec • 30 sec • … • 2 h
Communication object
switching output night
"(The output reacts with a delay of approx.
1 minute; “night” is recognised when light
is below 10 lux)
• do not send
• send in case of change
• send inverted in case of change
• send in case of change and cyclically
• send inverted in case of change and
cyclically
(as in case of all switching outputs)
Communication object
Switching output rain
(After approx. 8 minutes without rain, the
output is reset)
(as in case of switching output night)
Communication objects logic inputs
do not release • release
Send all logic outputs cyclically
5 sec • 10 sec • 30 sec • … • 2 h
Delayed sending of the switching outputs
after power up and programming
5 sec • 10 sec • 30 sec • … • 2 h; 10 sec
Maximum telegram rate
1 • 2 • 3 • 5 • 10 • 20 telegrams per second
Location is determined by
given city
Country
Germany • Austria • Switzerland • other
countries
City/postal code/coordinates
30 towns in Germany
5 towns in Austria
4 towns in the Switzerland
7 towns in other countries
Location is determined by
entry of coordinates
Eastern longitude in degrees
-180 ... +180
Eastern longitude in minutes
-59 ... + 59
Summary of Contents for 3090
Page 2: ......