background image

3

Safety and operating instructions

Weather Station P04/3-RS485

 • Version: 09.06.2022 • Errors excepted. Subject to technical changes.

1.

Safety and operating instructions

Installation, testing, operational start-up and troubleshooting should 
only be performed by an authorised electrician.

CAUTION!
Live voltage! 

There are unprotected live components inside the device.

• Inspect the device for damage before installation. Only put undamaged 
devices into operation. 
• Comply with the locally applicable directives, regulations and provisions for 
electrical installation. 
• Immediately take the device or system out of service and secure it against 
unintentional switch-on if risk-free operation is no longer guaranteed.

Use the device exclusively for building automation and observe the operating instruc-
tions. Improper use, modifications to the device or failure to observe the operating in-
structions will invalidate any warranty or guarantee claims.
Operate the device only as a fixed-site installation, i.e. only in assembled condition and
after conclusion of all installation and operational start-up tasks, and only in the sur-
roundings designated for it.
Elsner Elektronik is not liable for any changes in norms and standards which may occur
after publication of these operating instructions.

For information on installation, maintenance, disposal, scope of 
delivery and technical data, please refer to the installation 
instructions.

2.

Description

The 

Weather Station P04/3-RS485

 measures temperature, wind speed, brightness

and it recognizes precipitation. 

The weather station sends the currently recorded weather data, date and time once
every second. This data can be analyzed by an end device such as SPS, PC or MC. The

P04/3-RS485

 has 2 connections for data output (A/B) and 2 for power supply (24 V

DC).

Functions:

Brightness measurement

 with 3 separate sensors for east, south and west. 

Recognition of twilight/dawn

Wind measurement:

 The wind strength measurement takes place 

electronically and thus noiselessly and reliably, even during hail, snow and 
sub-zero temperatures. Even turbulent air and anabatic winds in the vicinity of 
the weather station are recorded

Summary of Contents for 30152













Reviews: