8
Operating the display
Solexa II Control
• from software version weather station 1.3, display 2.1 • Version: 11.05.2017
Technical changes and errors excepted.
8 – Rocker switch for manual operation
9 – Outputs
You use the rocker switch to drive or switch the individual outputs manually. The out-
puts are visible at the lower edge of the display with the display position number and
type symbol. The selected output is marked by a frame around the display position
number.
Please note that at this position only outputs are displayed for which the display has
been activated (see manual,
Display position
chapter in the descriptions of the default
settings for
Motor control units (RF-MSG, weather station)
, for
Relay (RF-Relay, RF-HE)
and for
Dimmer (RF-L)
.
Change output.
Operate or switch selected output manually.
Selected output is blocked for manual operation (alarm function active).
1.3.1. Meaning of the functional symbols (automatic mode
status)
The symbols show the automatic mode status for the selected output and the alarm
functions valid for the manual mode. A function is only displayed if it has been activat-
ed for the output.
Shading (shutters, awnings, blinds)
Please note that for an action such as "extend shading" a number of conditions must
be fulfilled. The functions are listed here in the sequence of their priority. This means
that the sun protection function is only executed if all previously named functions for
the shading have been released.
The detailed description of the automatic functions is in the
Shading - automatic mode
chapter in the manual.
Alarm functions:
Alarm functions have the highest priority and prevent manual operation of the output.
Wind alarm. Retracted shading.
In automatic mode, manual operation can again be activated, even if the auto-
matic functions are blocked by wind alarm.
Frost alarm (combination of precipitation and low outdoor temperature).
Retracted shading.
Rain alarm.
Retracted shading.
+
