background image

Description 

The PCKeypad is a wireless keypad with a PentaCode® transmitter built-in. It 
works with all of Elsema’s PCR series receivers. The installer has the option to 
use the classic 12-way dip switch coding or one of over 17 billion encrypted 
codes. (Please refer to the programming instructions) 

The PCKeypad is suitable for mounting either indoor or outdoor environments. 
It is housed in a strong vandal proof zinc alloy electroplated case. The 
PCKeypad conforms to Ingress Protection 65. 

The PCKeypad supports up to 2000 users with 4 to 8 digit PIN.  

These features make PCKeypad an ideal choice for gate and door access for 
homes, shops, factories, warehouses, laboratories, banks and prisons.  

 

 

 

Features 

 

Built-in PentaCode® transmitter  

 

Easy programming 

 

12 - 24 VDC or 12 - 18 VAC 

 

Long operating range 

 

Strong zinc alloy electroplated anti-vandal case 

 

All programming is done from the keypad 

 

2,000 users, PIN length 4 to 8 digits 

 

Adjustable transmission time 

 

Keypad has a backlight 

 

Built in light dependent resistor (LDR) for anti-tamper 

 

Built in buzzer 

 

Red, yellow and green LED display the working status 

 

Summary of Contents for PCKeypad









Reviews: