iS400/iS400D/iS400Solar
SWING
GATE
OPENER
MANUAL
B. CHECKS BEFORE INSTALLATION
Before proceeding with the installation check the following:
1) Check that the motor mounting position on the gate pillar can be done with the measurements
in Figure 1 and Graph 1
2) Be sure that gate moves freely
3) There are no obstacles in the moving gate area
4) Hinges are properly positioned and greased
5) There should be no friction between the gate leaf’s
6) There should be no friction with the ground while moving the gates
7) Check that the gate structure is suitable to install automatic gate motors
8) “C” value is 140mm
9) “D” can be measured from the gate easily
10) “A” = “C” + “D”
11) The value of “B” can be calculated from the value of “A” and the leaves opening angle
**Please make sure “B” and “A” are similar or the same in value that the leaf’s can be operated
smoothly, also to reduce the burden of the motor.
Fig 1 Graph 1
3
