Installing the ISDN Terminal Adapter
ELSA TanGo 2000
12
Installation under Windows NT 4.0
This procedure describes how you install your ISDN terminal adapter under Windows
NT 4.0.
a
Use your mouse to follow the command sequence
Start
E
Settings
E
Control
Panel
E
Modems
E
Add.
b
In the dialog window ’Install New
modem’, select
Don't detect my modem, I will
select it from a list
and click on
Next
.
c
Now click on
’Diskette’
in the ’Install new modem’ window
d
Enter the drive letter for your CD-ROM drive and click on
OK
.
e
In the dialog window ’Install New Modem’, select the ISDN terminal adapter
ELSA
TanGo 2000
, confirm with
Next
.
f
Now select the COM-port your ISDN terminal adapter is connected to and confirm
with
Next
.
g
Then enter your information about your location and confirm with
Next
.
h
Click on
Finish
to close the installation.
The
ELSA TanGo 2000
can now be operated from Windows NT 4.0. The software
components of Windows NT 4.0, such as HyperTerminal and Dial-up Network, can
make direct use of the ISDN terminal adapter.
.Please note that the setup of the various protocols (e.g. PPP (Internet) and V.120) is out-
lined on page 13.
Summary of Contents for TanGo2000
Page 1: ...1 9 21 27 33 15 Installation Guide Art Nr 20653 0298...
Page 2: ......
Page 3: ......
Page 11: ...Installation des ISDN Terminaladapters ELSA TanGo 2000 8...