ELSA Synergy 2000, Manual

Page: 35 / 50

|
Technical data
35
| ELSA Synergy 2000 |
EN
the '2 kOhm' setting (= '2k
Ω
') should be set for the sync inputs. You should
not try other switch settings at the sync inputs unless your monitor expects a
sync level that differs from that of most common monitors and does not pro-
duce a stabile image. In some cases, the switch settings are labeled only
with 'Low' and 'High'. If this is the case, either you can look up the Ohm val-
ues for the switch settings in the user manual provided with your monitor or
you can try both settings to see which one produces a stabile image in all of
the graphic display modes you require.