ELSA ERAZOR X, Manual

Page: 14 / 42

After installing the drivers
ELSA ERAZOR X and ERAZOR X²
8
Choosing the monitor
If your monitor supports DDC, the preset values will be displayed under 'Scheme'. If this
is not the case, click on
Change... to call up the database of monitor types. You will be
presented with a list of monitor manufacturers and monitor models. If your manufacturer
is present, click on the entry and then select your model. If your monitor is not listed,
there are two options. One option is to select the '_Standard monitor' from the list of
manufacturers and then select the resolution you wish to work with.
A second option requires information about the technical specifications for your monitor.
Consult your monitor manual to ensure that you have the correct information. Click on
Change... in the 'Monitor type database' window. In addition to the information regard-
ing the monitor manufacturer, and the model designation, you will have to enter the fre-
quency ranges for the horizontal and vertical scan frequencies and specify the diagonal
size of your monitor.
Check your entries for the image frequencies carefully, as otherwise you might damage
your monitor
. Look these up in your monitor manual or consult the monitor manufacturer.
ELSA SmartRefresh and ELSA SmartResolution
Click on the Details button in the ' Settings' to open a dialog where you can adjust
the refresh rates and video timings individually. In addition you can change the resolu-
tion in steps of 32 pixels. The graphics mode fine-tuning tool is especially for screens in
If your monitor type is not listed in the
monitors database you can enter the
monitor manufacturer and model type
here.
The vertical and horizontal frequency
ranges and the diagonal size of the
screen are the important settings.