ELSA AirLancer ISA-2, Manual, Page: 10 / 23

ELSA AirLancer
7
English
After installing the drivers check whether the parameters for the wireless network (e.g.
for ad hoc network or infrastructure network) are set correctly for your application (see
also 'Configuration Examples').
Installation under Windows NT 4.0
Before installing the driver you should ensure that you have system administrator
authorization. Otherwise you will not be able to install the driver using Windows NT 4.0.
The subsequent operation of the card is also possible with user rights, of course.
The NT network support for TCP/IP is required to operate ELSA AirLancer MC-2 under
Windows NT.
Install driver for
ELSA AirLancer ISA-2
a
Start the installation with Start
E
Settings
E
Control Panel
E
Devices . Select
the entry PCMCIA and change the entry Start Type to 'automatic'. Confirm with
OK and start the device by clicking the Start button with the mouse.
b
Afterwards choose Start
E
Settings
E
Control Panel
E
PC card (PCMCIA) . If
the driver for ELSA AirLancer ISA-2 has not been properly loaded, you will find the
entry '(Empty) - Socket 0' here.
Install driver for
ELSA AirLancer MC-2
When installing under Windows NT 4.0, check whether the required system resources
are available.
ELSA AirLancer MC-2 will be installed with IRQ 10 and the address 200 -
240 by default. The interrupts and addresses can be viewed under Start
E
Programs
E
Administrative Tools (Common)
E
Windows NT Diagnostics .
If the required resources are not available, please make a note of other free resources
and specify them during the installation. It is also possible to change the resource
allocations at a later time with
Start
E
Settings
E
Control Panel
E
Network
E
Adapters
E
Properties .
a
Insert
ELSA AirLancer MC-2 into the free PCMCIA slot of a notebook computer or
into the PCMCIA adapter ELSA AirLancer ISA-2. Note the marks to ensure that the
card is in the correct position.
b
Start the installation with Start
E
Settings
E
Control Panel
E
Network . Select
the Add button on the 'Adapter' register tab.
c
In the 'Select Network Adapter' window select the Have disk... button , and enter
the path to your CD drive (e.g. D:\).
d
Check the settings of the wireless network card.