- 22 -
Safety and conformity
Disclaimer
ELRO is not liable in any way to damage caused during mounting/installation.
In doubt always consult a professional.
Caution
•
Do not plug in more than one power plug at the same time. This may cause excessive
heat or a fire.
•
Do not connect other products to the device while using it. This may cause malfunction.
•
Do not use water, thinners, or detergents used for cleaning oil products when cleaning
the outside of the device. Clean it with a dry cloth to prevent malfunction or electric
shocks.
•
Do not install the product in a damp environment. This may cause an electric shock or a
fire.
•
Unplug the power cord gently. If damaged, the power cord may cause a fire or an electric
shock.
•
Do not plug in the power plug with a wet hand. This may cause an electric shock.
•
Do not disassemble, repair, or alter the product. This may cause a fire, an electric shock,
or an injury due to malfunctioning of the product.
•
Do not use an alternating current interruptor. This may cause an electric shock.
•
Do not plug in the power plug if the holes in the socket are bigger than usual. This may
cause an electric shock or a fire.
•
Make sure no dust or other substances are collected on the product.
•
Make sure no substances get into the product. This may cause malfunction.
•
Do not place heavy objects on the product. This may cause malfunction.
•
Do not disassemble the product and prevent any damage.
•
Avoid direct sunlight on the heating systems during installation.
•
Install the product on a flat and stable surface to ensure optimal functioning.
•
Unplug the device if unused for a long period of time.
•
Immediately unplug the device if it produces unusual sounds and contact the service
centre.
