Device description
elrest
Automationssysteme GmbH
e
VISIO PTE715_Windows.EN
Page: 7
1.3
Security regulations and safty precautions
This manual was provided for trained and competent personnel. The qualification is defined by the
European guidelines for machines, low-voltages and EMV. The connection and the assembly of the
devices can be carried out only via an electrical specialist, if the voltages are higher than the Safety Extra
Low Voltage (SELV).
In each case the national regulations and the valid safety regulations have to be considered. Interferences
and changes in the devices automatically render the warranty void.
Due to the large number of different applications for these devices, you must adapt yourself for your
particular application.
If circuit components should fail, appropriate safety devices must ensure that the attached periphery is
stopped.
Do not try to repair the devices themselves or exchange electrical parts. Please turn exclusively to the
elrest service department. You can contact us on the elrest-hotline.
Consider the local, national standards and regulations during the installation and the employment of the
devices.
The relevant regulations (VDE etc.) while handling electrical system are to be considered:
•
To activate
•
Prevent unintentional restart
•
The unit must be deenergized
•
Ground and short-circuiting
•
No ground-loops.
•
Cover or shield nearby live electric parts.
1.4
Copyright
Copyright
2017
elrest Automationssysteme GmbH (in further consequence “elrest” mentioned) all rights
are reserved.
All parts of the software and the documentation are subject to copyright. The software described in this
manual must be used exclusively in the context of the license terms.
No part of the documentation and software may be reproduced or assimilated by use an electronic data
processing system, reproduced or spreaded in any form without a written permission of the company
elrest (pressure, photocopy, microfilm or another procedure). The expressly exceptional cases, named in
the paragraphs 53 und 54 UrhG, are not affected.
All measures have been taken to ensure the correctness and completeness of the information in this
documentation.
Nevertheless, errors cannot be excluded. The company elrest cannot assume legal
responsibility or any liability for damage, which results from the use of information from this manual or
from the use of the program described in this documentation.
The product names mentioned in this manual are trade marks or registered trade marks of the respective