Device description
elrest
Automationssysteme GmbH
e
VISIO PTE715_Windows.EN
Page: 11
1.7
Before you start…
Before switching-on the supply voltage, please check definitely:
•
The wiring
•
Possible interference
•
Free circulation around the heatsink
1.8
Storage, transport and packaging
The delivery has to be checked for completeness after the receipt. Possibly determined transport
damages shall be notified to the shipping company and the manufacturer immediately. In the case of a
possible temporary storage it is recommended to use the original packaging. The storage must be clean
and dry. According the §BGB §446 and §448, the transfer of perils of the purchased product will pass to
the buyer from invoicing. elrest does not assume any liability for the transport risk.If the carrier's liability of
the transport enterprise does not cover the commodity value, it is incumbent on the buyer to conclude an
additional transport insurance.
The devices are delivered in a suitable packing. To avoid damages please remove the
packing before using the device. If the packing includes further accessories or
descriptions, consider and keep them absolutely.
1.9
Warranty
A warranty claim presupposes a professional assembly and start-up, based on a valid assembly-,
commissioning instruction and the operating instructions. The necessary assembly, start-up and
maintenance work may be accomplished only by adept and authorized persons. See our EULA regulations
too.
Manufacturer
Trademark
Country of origins
elrest
Automationssysteme GmbH
D-73230 Kirchheim unter Teck
Leibnizstraße 10
Phone: +49 (0) 7021/92025-0
Fax: +49 (0) 7021/92025-29
Germany
