1000474V01 DOC_Operation Manual LIBERO Gx.docx | Page 6 / 21
4
Functionality and Modes
Unless otherwise noted the following information applies equally to all three LIBERO models.
After configuration of the data logger measured values for temperature and relative humidity (LIBERO
CH only) are recorded, stored and evaluated with regard to the defined alarm criteria. The display shows
the current mode.
4.1
Elements
4.1.1
Generic elements
Display
Start / Stop button
Press long (> 3 seconds) to start / stop device
Light sensor (not configurable in version 1)
if light sensor is configured, make sure it is not dirty or covered
QR-Code containing Device ID and weblink to cloud
Info / Menu button
Press short (< 1 second) = Info (toggle display / menu)
Press long (> 3 seconds) = Menu (open menu / select menu entry)
Device type
Device ID and Start before date
4.1.2
Specific elements
Logger type
Element
LIBERO GE
M8 connector for Pt100 probe
Compare chapter 6.2 -
External Pt100 Probes
for LIBERO GE for
available probes
2
5
6
7
3
4
1
