manualshive.com logo in svg

ELPRO ECOLOG-PRO Series, Operation Manual

Share
Download
ELPRO ECOLOG-PRO Series Operation Manual Download Page 7

Document: EP6001Eb

SYSTEM DESCRIPTION

7 - EN

1.1

Configuration and Evaluation

Configuration, calibration, and monitoring are carried out with the elproMONITOR software.

SM3031D, elproMONITOR operating instructions

1.2

Notes

Power supply unit

Follow the safety and application instructions of the power supply unit. Only operate the 
device using the delivered power supply unit. Use of an incorrect power supply unit may 
cause damage to the device. Always replace defective or damaged power supply units.

Cleaning

To clean the modules, use a slightly moist cloth. Never use thinner, gasoline, alcohol, or 
any other cleaning agents since they may damage the housing.

Environmental 
Conditions

• Make sure the modules are at room temperature before initial startup.

• No guarantee can be given if functions exceed the specified threshold range. Ambient 

temperature 0°C to 40°C, 10% RH to 90% RH, non-condensing

• Protection class IP20

Summary of Contents for ECOLOG-PRO Series

























Reviews:

No comments

Brands by name

Popular brands

Load more brands