1000465V01 DOC - ECOLOG-PRO 2PTR and 1THR - Operation Manual_EN.docx | Page 9 / 15
Measurement range and accuracy
Sensor data (page 11)
Measurement resolution
0.1 °C
Logging and communication interval
1, 2, 3, 5, 10, 15, 20, 30, 60 minutes; user programmable via software (ELPRO
Cloud)
NOTE: Logging interval will impact battery life
Channels
2 channels (1x temperature / 1x humidity)
Probe type
Digital probe
Probe connection
Digital 3-PIN combination probe
Extension: maximum 30 meters, no shielding
Memory capacity
43'000 measurement values
Environmental storage temperature /
humidity
-10 °C..+50 °C
10 %RH..90 %RH, non-condensing
Environmental operating temperature
/ humidity
0 °C..+40 °C
10 %RH..90 %RH, non-condensing
Operating altitude
This device must not be used at altitudes higher than 2000 meters above sea
level.
ID number
"R" followed by a 6-digit number; the ID number is used to identify the module in
the ELPRO Cloud software.
Radio connection to communication
module
Available in two versions: 868 MHz (Europe) or 915 MHz (US)
Note: Only the supplied antenna may be used.
Left LED (Link)
:
Red flashing light: ECOLOG-PRO 1THR is active but is not connected to a
communication module (ECOLOG-PRO RBR)
Green flashing light: ECOLOG-PRO 1THR is active and connected to a
communication module (ECOLOG-PRO RBR)
The interval of the flashing light is 10s.
Right LED (Data):
Red flashing light: Measurement on one or both channels has started. There are
one or more failures in measurement.
Green flashing light: Measurement on one or both channels has started.
Everything is OK.
The interval of the flashing light is 10s.