645M-4 User Manual
645M-4 User Manual_V1.1.docx
www.elpro.com.au
Page 55 of 63
Traffic rule configuration page: This page allows you to change advanced properties of the traffic rule entry, such as
matched source and destination hosts.
Name
: Traffic rule entry name.
Restrict to address family
: IPv4+IPv6, IPv4 and IPv6 can be selected. Specify the matched IP address family.
Protocol
: Specify the protocol matched in this rule. “Any” means any protocol is matched.
Source zone
: It is the zone that the traffic comes from.
Source MAC address
: Traffic rule check if the incoming packet’s source MAC address is matched.
Source address
: Traffic rule check if the incoming packet’s source IP address is matched.
Source port
: Traffic rule check if the incoming packet’s TCP/UDP port is matched.
Destination zone
: The zone that the traffic will go to.
Destination address
: Traffic rule check if the incoming packet’s destination IP address is matched.
Destination port
: Traffic rule check if the incoming packet’s TCP/UDP port is matched.
Action
: If traffic is matched, the system will handle traffic according to the Action (accept, drop, reject, don’t track).
Extra argument
: Passes additional argument to the “iptables”.
