3
Before you begin
Please ensure that the following
Your eTouch Tablet is at least 70% Charged
The USB PC Link cable is available
If using a Laptop it is plugged into a power outlet
Preparing your eTouch for Firmware updating
Before you can install the update the eTouch tablet needs to be put into the update mode
With the power unplugged from the tablet hold down the Menu Button
Whilst holding down the Menu button press the power button
Keep holding for 4 seconds then release both the power and menu buttons. The screen will
remain blank, do not worry this is normal.
Connect your eTouch tablet to your PC using the USB cable. On connection a drive should
appear labeled VDfu.
If the drive is labeled as anything other than VDfu then the unit is not in Update mode. Please
follow the instructions accompanying your tablet device to reset your eTouch and follow the
instructions above. If the eTouch does show Vdfu or will not go into Update mode please
contact Elonex support for further advice.
Your device is now ready to be updated.
Updating the 765ET Version 2
To Update the Firmware of the eTouch 765ET Version 2 please run the update program from the
location where you unzipped the firmware package by following the instructions below
Double Click
MPTool.exe
IF on Windows Vista / Windows 7 click
Yes
if the User Account Control permissions dialog
appears
Click the Scan button the Flash tool will then search for a connected device
If found the following screen will appear
