Connect power and ethernet cable.
Connections are underneath the
register near the back.
Install receipt paper:
Install the paper by pressing the lid release button
and lifting up the printer lid. Note the correct paper orientation from
pictures above.
Do not use paper that exceeds 80 mm in width.
If an Internet connection is not found in Step 3, hold the power button
for 3 seconds and release. This lets you enter the set-up page to find
your Wi-Fi connection. Under the Network Tab, select the Wi-Fi
network. Once connected, your device should start auto provisioning
itself to your software provider. Once set up is complete, password
1elo
can be used to re-enter control panel if needed.
Power on the register:
Press the power button (located on the back of
the display head). If an Ethernet connection is available, registration
will start automatically when the device powers on.
1
2
3
4
"
12
-
r
)$.
.
