User Manual
–
ET6553L
UM600326 Rev A, page 21 of 37
Audio
Audio can be output from the following locations:
1.
From the monitor speakers via the video channel
2.
The Line Out port on the monitor IO ports
3.
If an Elo Computer Module is installed, then then from the computers Line Out port
See the “Audio” OSD parameter for details.
Note: When headphones are plugged into the headphone output jack, the internal speakers turn off and audio is played over the
headphones.
Volume and muting of the speaker and headphone outputs are controlled by the OSD.
Controlling the monitor remotely
The touchmonitor has the ability to allow remote access from a host application. This is done through the use of either the VESA Display Data
Channel Command Interface (DDC/CI) or the Multiple Display Control command sets. Users can communicate with the monitor through either
of these protocols. The host application can send a variety of different commands which will be executed on the touchmonitor. For detailed
information regarding the command set, refer to the application note available
CEC Functionality (Consumer Electronic Control)
The touchmonitor is equipped with CEC capability. If a host device (with CEC built in) is connected to the monitor through HDMI, the monitor
can be turned on by only turning the host device on.
Real Time Clock (RTC) Functionality
This touchmonitor has real time clock functionality which will help to prolong the lifetime of the touchmonitor. In the OSD menu,
there is a sub-menu called RTC Settings.
To utilize the RTC functionality:
The user must set up the Time setting for their specific time zone.
