background image

User Manual ET1302L 

 

25 

 

Section 8: Warranty Information 

Except as otherwise stated herein, or in an order acknowledgment delivered to Buyer, Seller warrants to Buyer that the Product shall be free of defects in 
materials and workmanship. The warranty for the touch monitors and their components is three years.

 

 
Seller makes no warranty regarding the model life of components. Seller’s suppliers may at any time and from time to time make changes in the 
components delivered as Products or components.

 

 

Buyer shall notify Seller in writing promptly (and in no case later than 30 days after discovery) of the failure of any Product to conform to the warranty set 
forth above; shall describe in commercially reasonable detail in such notice the symptoms associated with such failure; and shall provide to Seller the 
opportunity to inspect such Products as installed, if possible. The notice must be received by Seller during the Warranty Period for such a product, unless 
otherwise directed in writing by the Seller. Within 30 days after submitting such notice, Buyer shall package the allegedly defective Product in its original 
shipping carton(s) or a functional equivalent and shall ship to Seller at Buyer

’s expense and risk.

 

 

Within a reasonable time after receipt of the allegedly defective Product and verification by Seller that the Product fails to meet the warranty set forth 
above, Seller shall correct such failure by, at Seller’s discretion, either (i) modifying or repairing the Product, or (ii) replacing the Product. Such 
modification, repair, or replacement and the return shipment of the Product with minimum insurance to Buyer shall be at Selle

r’s expense. Buyer shall 

bear the risk of loss or damage in transit, and may insure the Product. Buyer shall reimburse Seller for transportation cost incurred for Product returned 
but not found by Seller to be defective. Modification or repair of Products may, at Seller’s discretion, take place either at Seller’s facilities or at Buyer’s 
premises. If Seller is unable to modify, repair, or replace a Product to conform to the warranty set forth above, then Seller 

shall, at Seller’s discretion, 

either refund to Buyer or credit to Buyer’s account the purchase price of the Product less depreciation calculated on a straight-line basis over Seller’s 
stated Warranty Period.

 

 
These remedies shall be the buyer’s exclusive remedies for breach of warranty. Except for the express warranty set forth above, seller grants no other 
warranties, express or implied by statute or otherwise, regarding the products, their fitness for any purpose, their quality, their merchantability, their non-
infringement, or otherwise. No employee of Seller or any other party is authorized to make any warranty for the goods other than the warranty set forth 
herein. Seller’s liability under the warranty shall be limited to a refund of the purchase price of the product. In no event shall Seller be liable for the cost of 
procurement or installation of substitute goods by Buyer or for any special, consequential, indirect, or incidental damages.

 

 

Buyer assumes the risk and agrees to indemnify Seller against and hold Seller harmless from all liability relating to (i) ass

essing the suitability for Buyer’s 

intended use of the Products and of any system design or drawing, 

and (ii) determining the compliance of Buyer’s use of the Products with applicable 

laws, regulations, codes, and standards. Buyer retains and accepts full responsibility for all warranty and other claims rela

ting to or arising from Buyer’s 

products, which include or incorporate Products or components manufactured or supplied by Seller. Buyer is solely responsible for any and all 
representations and warranties regarding the Products made or authorized by Buyer. Buyer will indemnify Seller and hold Seller harmless from any 
liability, claims, loss, cost, or expenses (including reasonable attorney’s fees) attributable to Buyer’s products or representations or warranties concerning 
same.

 

Summary of Contents for E683204































Reviews: