Elo TouchSystems E218, Operation Manual

Page: 6 / 8

ELOE218ZK002
6
3.3.3 Virtual port properties setting
When connection is established the adapter virtual port appears as the next COM port
in
the Správce za
ř
ízení . (Device
Manager) Go to Ovládací panely
(Control panel) and select System /
Hardware and run the Správce za
ř
ízení
(Device Manager). The next COM called
E218 RS485-USB Adapter has appeared
among the Ports . In Vlastnosti
(Properties), its setting, e.g. data rate,
character format and/or flow control can
be changed. Caution!!! The control
signals are not transmitted hence no
hardware flow control can be used.
Pod volbou The port number assignment
(e.g. COM3, COM4,) may be changed
under the
Up
ř
esnit (Specify option).
4.0 Specification
4.1 Parameters
USB interface USB 2.0 full-speed (12Mb/s)
USB connector typ A - male
RS485 connector, RJ45
Terminator internal 150 Ohm
Transmission mode asynchronous, half-duplex
Maximum data rate 921 600 kbps
4.2 Other
Supply from USB interface
Power take-off max. 100 mA
Length 2300 mm
Weight cca 100 g
Skladovací teplota - 10
o
to +55
o
C
Working temperature + 0
o
to +50
o
C
Humidity 0 – 85% (non-condensing)