Please go to www.elotouch.com/support to verify you have the latest drivers before installing this device.
Installation
Select the location to mount the
NFC Reader. Some systems have
more than one mounting option.
Remove the selected peripheral
cover from the display head to
expose the peripheral bay.
Gently press the NFC Reader into
the peripheral bay making sure the
connector is mated.
Install the 2 flat head screws included
with the kit.
Do not adjust the NFC Reader angle
without installing the screws or damage
may occur.
Remove the protective film from the
included mylar covers and place the
covers over the screws.
Adjust the angle as needed.
