Aegis – Series
31
7
. Fit the
VFD Customer Display
onto the
VFD Mounting Coupler
.
8
. Plug the
DB9F
connector of the
VFD Signal Cable
to a COM port on the
computer.
9a
. For powering from the computer.
a. Plug the 3 pin connector of
VFD Power Cable
to one of the connector
on
the
Power Bracket
.
b. Plug the other end of the
VFD Power Cable
to the
DC Jack
on the
DB9F
connector of the
VFD Signal Cable
.
9b
. For powering using an external AC adapter.
a. Plug the DC plug from the AC adapter to the DC Jack on the
DB9F
connector
of
the
VFD Signal Cable
.
b. It is Important that only an AC adapter made specifically for this
VFD
Customer Display
is used. Other AC adapters, even with the same
DC Plug, if used may cause damage to the Customer Display and,
possibly, the computer as well.
Summary of Contents for Aegis A121TA
