3-3
Interface Connection
NOTE:
Before connecting the cables to your touchmonitor and PC, be sure that the computer and touchmonitor are
turned off.
1
3 2
2
5
1
3
2
5
Adapter
Video Cable
Serial Cable USB Cable OSD Remote Control Key
(option)
Adapter
Video Cable
USB Cable OSD Remote Control Key
(option)
1. Connect one end of the
power adapter
to the monitor and the other end to the connector of
the power cord.
2. Connect one end of either the
touchscreen serial (RS232) cabl
e or the
touchscreen USB
cable
(but not both) to the rear side of the computer and the other end to the LCD monitor.
Tighten by turning the two thumb screws clockwise to ensure proper grounding (USB cable
does not have thumb screws).
3. Connect one end of the
video cable
to the rear side of computer and the other to the LCD
monitor. Tighten by turning the two thumb screws clockwise to ensure proper grounding.
4. Press the
power button
on the rear panel to turn the monitor power on.
5. Connect one end of
OSD remote control key
(option) to the monitor.
Power Requirements
NOTE:
This monitor operates at 12V
4A
DC Input:
Plug shape: Tuning Fork Type
Plug polarity: (+)
)
(-)
Outside dimension: Ø 5.5 ± Ø.1
Inside dimension: Ø 2.1 ± Ø.1
