© Copyright 2017 Elo Touch Solutions, Inc.
3
QIG600042 REV. A
Remove and save (2) screws on
rear of stand with provided hex
wrench, pull out printer tray.
Add (2) screws from bag “A”;
leave ~3mm (1/8”) gap for stand.
Gap
Align slots on bottom rear of stand with (2) screws on base and
slide on stand. Add (4) screws from bag “B”. Tighten (2) screws at
rear.
For Floor Stand, go to step
4
For Countertop Stand, continue to step
2
Continue to step
12
for Countertop Stand
1
2
3
