59
Fagoting
Machine settings
q
Pattern:
MODE 2: 16
w
Thread tension:
AUTO
e
Presser foot:
Satin stitch foot F
r
Foot pressure:
5
* Stitch patterns (mode 1) (mode 2) can also be
used.
q
e
w
r
Use this stitch to join two pieces of fabric to create an
open work appearance and add design interest.
Fold under each fabric edge 1.5 cm (5/8˝) and press.
Pin the two edges to paper or tear away backing 0.5 cm
(3/16˝) apart.
q
0.5 cm (3/16˝)
Sew slowly, guiding the fabric so the needle catches the
folded edge on each side.
After finishing sewing, tear away the paper.
Scallop
Machine settings
q
Pattern:
MODE 2: 24
w
Thread tension:
AUTO
e
Presser foot:
Zigzag foot A
r
Foot pressure:
5
* Stitch pattern (mode 2) can also be used.
q
e
w
r
Sew scallops 1 cm (3/8˝) from the fabric edge.
Trim the allowance close to the stitches.
Make sure not to cut the stitches.
q
French Knots
Machine settings
q
Pattern:
MODE 2: 50
w
Thread tension:
5−8
e
Presser foot:
Satin stitch foot F
r
Foot pressure:
5
Tighten the thread tension to 5-8 when sewing.
Place the fabric under the foot and sew one French knot.
Raise the presser foot, move the fabric, lower the presser
foot and sew next French Knot.
NOTE:
If you want to sew a row of evenly spaced French
knots, you must program straight stitches after the
French knots. Refer to the page 70.
q
e
w
r
