1.Introduction
Congratulations! With the PMF600 you have acquired a state-of-the-art 10-channel power
mixer that sets new standards . Right from the start ,our goal has been to design a revolutionary
device that can be used for a great variety of applications . And indeed , this over whelming
power mixer gives you plenty of functionality and a broad range of connection and expansion
options .
1.1 Before you start
Your PMF600 was carefully packed at the factory and the packaging is designed to
protect the unit from rough handling . Nevertheless , we recommend that you carefully
examine the packaging and its contents for any signs of physical damage which may have
occurred during transit .
F
If the unit is damaged , please do NOT return it to HARMAN ,but notify your dealer
and the shipping company immediately . Otherwise ,claims for damage or replacement
may not be granted .
1.1.1 Shipment
1.1.2 Initial operation
Be sure that there is enough space around the unit for cooling and , to avoid overheating
please do not place the PMF600 near radiators etc .
F
Before you connect the PMF600 to the mains , please make sure that the voltage
setting on the unit matches the local voltage !
F
If you set the unit to a different mains voltage , be sure to use a fuse of the correct
type and rating . Please refer to the
SPECIFICATIONS
for details .
F
Blown fuses must be replaced by fuses of the same type and rating ! Please refer to
the
SPECIFICATIONS
for details .
The mains connection is made using the enclosed power cord and a standard IEC receptacle.
It meets all of the international safety certification requirements .
F
Please make sure that all units have a proper ground connection . For your own
safety , never remove or disable the ground conductor from the unit or of the AC
power cord . The unit shall always be connected to the mains socket outlet with a
protective earthing connection .
2. CONTROL ELEMENTS
2.1 Front panel
Your PMF600 comes with ten input channels , which only differ in terms of pad switch ,
peak LED and interface panel . Since the EQ effect ,monitor and level controls are identical
on all channels , they will be described only once on the enclosed sheet .
