SUPPLIED ITEMS
■
Remove the Visual transmitter
1. First Step is to select “Setup”.
Contact your dealer if any of the following items are not included in the package.
2. Select “Remove Video Source” from the menu. And press the Menu/Select button.
3. Select the Visual transmitter to remove. Then exit the menu.
■
Modification of the name of the Visual transmitter
1. First Step is to select “Setup”.
2. Select “Modify Video Source Name” from the menu. And press the Menu/Select button.
AC adapter with attachments
AC adapter
Receiver
3. Select the registered Visual transmitter. And press the Menu/Select button.
Instruction Manual
(Europe / England)
(USA)
4. A cursor is displayed. Select the part you want to modify. And press the Menu/Select button.
Caution
・
Supplied AC attachment is for your country.
・
When using the product, attach the AC attachment to the AC adapter.
5. Select a letter once the color of the cursor changes.
6. Press the Menu/Select button after selecting a letter to input.
7. Press the Menu/Select button for long after all the letters has been input. Select “Save” or “Exit” to finish.
Assembling/ Disassembling procedure for the AC adapter
SLEEP MODE
Assemble or disassemble the AC adapter and the AC attachment by taking the following procedure.
The VP Receiver enters Sleep mode in 3 minutes after the wireless connection with the Visual transmitter is
disconnected.
Make sure to unplug the cable before starting the assembling/ disassembling work.
To return to normal operation mode, press one of either the Menu/Select button, the Down button or the Up
button of the VP Receiver after power on the transmitter.
■
Assembling
Slide the AC attachment along the groove of the AC adapter
It will show “Linking” image.
and press it into until you hear a “click” sound.
The image appears once the wireless connection with the Visual transmitter is established.
To open the menu while "Linking" image is in display, press the Menu/Select button.
(*1)
■
Disassembling
Perform the wireless settings after the menu is displayed.
While pressing the center of the AC attachment, slide the
TROUBLESHOOTING
AC attachment to remove.
If trouble occurs or you have any queries, first check this section.
Caution
*1 Use an appropriate AC attachment for your region.
If the problem persists, check your warranty and contact the dealer where you purchased the product.
The VP Receiver does not work.
The AC adapter is disconnected. Check the connection between
the AC adapter and the wall outlet.
Is the Visual transmitter registered?
Add the Visual transmitter.
The AC adapter is disconnected from the VP Receiver.
Check the connection between the AC adapter and the VP
Receiver.
No image is displayed.
HDMI cable is not connected properly.
Firmly insert HDMI cable into the connector.
The cable is damaged.
Do not use a damaged cable.
No sound is output.
HDMI cable is disconnected.
No audio from the Visual transmitter is input.
No sound is output when there is no audio input.
The volume of the Visual transmitter or the image output device is
set to minimum. Turn up the volume.
The image is distorted.
HDMI cable is not connected properly.
Firmly insert HDMI cable into the connector.
The input signal is out of the display range of the connected
equipment. Check the resolution.
The cable is damaged.
Do not use a damaged cable.
There is a wireless device nearby. It may interfere with the wireless
communication.
Move the VP Receiver to a location with no interference.
OPERATION PROCEDURES
Part Names
1. Micro USB power port : AC adapter terminal.
2. Menu/Select button : To display or select menu.
3.
Up button : To scroll up menu items.
4. Down button : To scroll down menu items.
5. HDMI port : HDMI output terminal.
6. Link light : LED to indicate the connection status
with the video equipment.
7
. Power light : LED to indicate the power supply condition.
1
2
3
4 5
6 7
■
Link light (Blue)
・
Lit : Already Matching with Visual transmitter.
・
Blink : Searching WHDI input signal.
■
Power light (White)
・
Lit : Power is ON.
・
Off : Power is OFF.
・
Blink : Sleep mode.
Caution
・
The USB terminal of this product is for power supply only and other USB devices cannot be
connected. The power consumption of this product is higher than the standard of the USB
bus power. Use the supplied AC adapter to supply power to the product. Do not use the bus
powered USB to supply power to the product.
・
Use the Visual transmitter that supports WHDI.
・
HDMI output of this product complies with HDMI.
Caution
・
If the problem persists, the product may be defective. Contact the dealer where you
purchased the product for repair.
Connecting the VP Receiver
Connect the equipments as shown in the drawing.
PRODUCT SPECIFICATIONS
Operating Temperature
0
℃
- 40
℃
(32
°
F – 104
°
F)
Wireless Band Used
5190MHz - 5795MHz (USA / Canada)
5190MHz - 5670MHz (Europe / Eurasia)
Communication Distance
Approx. 10m (32.8feet)
(differs depending on the usage conditions)
Power Supply
AC adapter
Input: 100V-240V, 50/60Hz(0.5A:USA/JAPAN, 0.3A:Others)
Output: 5V, 2A
Standards
HDMI / WHDI compliance, including HDCP
Transmitter registration
8 sets
HDMI OUT (Type A)
Image output:
VGA (640x480)60Hz/75Hz, SVGA (800x600)60Hz/75Hz, XGA
(1024x768)
60Hz/75Hz, WXGA (1280x768) 60Hz,
WXGA (1280x800) 60Hz, SXGA (1280x1024) 60Hz/75Hz
1152x864 (60Hz), 1280x960(60Hz)
480p, 576p, 720p, 1080i, 1080p
Audio output: 192 KHz x 24 bit
Power Consumption (Current)
5.5W( 5V / 1.1A) without AC adapter
External Dimensions
L83 x W80 x H31 (mm)
L3 1/4” x W3 1/8” x H1 1/4”
Weight 110g
(0.24lb)
Monitor (*2)
WHDI
HDMI Connector
Visual transmitter
AC adapter (*1)
VP Receiver
To an electric socket
Projector (*2)
HDMI cable (*3)
HDMI out
USB power
Caution
*1 AC adapter is different according to the destination.
*2 Change the input mode of the image output device to HDMI.
*3 HDMI cable is not supplied with this product.
Performing the wireless settings
Perform the wireless settings before using the product.
Connect the video equipment that supports HDMI before performing the menu operation.
Display the menu by pressing the Menu/Select button. And press the Menu/Select button.
6-14, Meizen-cho, Mizuho-ku, Nagoya, 467-8567, Japan
You can add/remove or modify the name of the Visual transmitter from the menu.
ELMO USA CORP.
■
Add the Visual transmitter
1. First Step is to select “Setup”.
Headquarters
1478 Old Country Road, Plainview, NY 11803-5034, U.S.A
2. Select “Add new Video Source” from the menu.
And press the Menu/Select button.
Tel:(516) 501-1400 Fax:(516) 501-0429
E-mail: [email protected] Web: http://www.elmousa.com
3. The VP Receiver is now ready to receive signals from the Visual transmitter. Perform the registration from
West Coast Branch
Cypress Pointe Business Park, 5676 Corporate Avenue
the Visual transmitter.
Cypress, CA 90630, U.S.A
Tel:(714) 828-8457 Fax:(714) 828-8429
4. The VP Receiver registers the Visual transmitter once the signal from the Visual transmitter is received by
ELMO Europe SAS
the VP Receiver.
Immeuble Elysées la Défense, 7C, Place du Dôme,
5. Select “OK” and press the Menu/Select button.
92056 Paris la Défense, France
Tel: 33 (0) 1 73 02 67 06 Fax: 33 (0) 1 73 02 67 10
Caution
・
For details about the operation of the Visual transmitter, refer to the instruction manual of the
respective Visual transmitter.
VPR-1(E)_M R0-Xdx
