6
PCB CONNECTION
TERMINAL BLOCK DEFINITION
Pin Name
AC24V Set
DC12V Set
VG
AC24V in : line2
DC12V in : GND
V_IN
AC24V in : line1
DC12V in : +12V
12V
DC12V output : +12V ( For Keyboard ; Max.400mA )
GND
DC12V output Ground and Alarm Ground.
1
Alarm 1
2
Alarm 2
3
Alarm 3
4
Alarm 4
D+
RS-485 Differential Signal D+ ( Tx +)
D-
RS-485 Differential Signal D- ( Tx - )
D+
Additional RS-485 Differential Signal D+ ( Tx +)
D-
Additional RS-485 Differential Signal D- ( Tx - )
Remark :
1. Half-duplex mode is standard.
2. D+,D- are used to transmit and received commands. You need only two wires to
transmit and receive commands under half-duplex mode.
1. BNC Video Output
You can connect video
cable to monitor directly.
2. Terminal Block
Power, Control Signal
and alarm inputs.
3. 16 Pin Connector
Connect cable to dome
camera
4. 16 Pin Connector
Connect cable to external
box ( Optional )
