User’s Manual
•
ALARM ACTION
Select one of these modes that choose a kind of actions that should be executed
when an alarm is triggered. The alarm actions can be set to execute the preset
position, sequence, auto-pan or cruise function. Use the right direction key of the
control keyboard to change the setting, and the bellowing items will change in
cooperating with your selection.
•
PRESET
Select a preset point where the dome should go when an alarm pin is triggered. The
Preset points can be set by a control keyboard.
SEQUENCE
Select a sequence line that the dome camera should execute when alarm pin is
triggered. The Sequence line should be defined prior in SEQUENCE setup menu.
AUTOPAN
Select an auto-pan line that the dome camera should execute when alarm pin is
triggered. The Auto-pan line can be defined in setup AUTOPAN menu.
CRUISE
Select a cruise line that the dome camera should execute when alarm pin is
triggered. The Cruise line can be defined in CRUISE setup menu.
•
DWELL TIME
The DWELL TIME is the duration of executing ALARM ACTION: Preset or Sequence.
When alarm takes place, the dome will go to the preset position or execute
sequence function and stay at each sequence point for a period of time (1~127
seconds). If select <Always>, the dome will go to the preset position and stay there
until alarm condition is released or users rotate the dome.
NOTE:
The DWELL TIME is only accessible when selecting ALARM
ACTION: Preset or Sequence.
•
EXIT
Exit the ALARM SETTING menu.
3.3.13 HOME
SETTING
Users are able to set an operation mode to ensure constant monitoring; if the dome idles
for a period of time, the pre-set function will be activated automatically, this is the HOME
function. HOME function allows constant and accurate monitoring, to avoid the dome
27