24
When the output destination is set to Auto while both HDMI and RGB cables are connected
to the LX-1, the LX-1 automatically selects HDMI as the output destination.
■
CHANGING THE OUTPUT DESTINATION
The output destination of the video signal can be changed by the following procedure:
［
MENU
］＞［
Settings
］＞［
Output settings
］
Auto ：［ MENU ］＞［ Settings ］＞［
Output settings
］＞［ Auto ］
→The LX-1 automatically selects the output destination.
HDMI：［ MENU ］＞［ Settings ］＞［
Output settings
］＞［ HDMI ］
→Set the output destination to HDMI.
RGB ：［ MENU ］＞［ Settings ］＞［
Output settings
］＞［ RGB ］
→Set the output destination to RGB.
Note
CAUTION
The output destination will be changed to the one selected by [ ]. If a corresponding image
output device is not connected to the LX-1 you cannot view the image.
Verify that a correct image output device is connected to the LX-1 before selecting the output
destination.
