X1
X1
X2
X1
W
Y
3H
3+3
5H
4+4
8H
4+6
AUTO
ON
OFF
X1
X4
X1
X1
X2
X2
battery
1.
Packing list
Warm prompt
1. Solar lamps and lanterns rely on photovoltaic panels to absorb sunlight into electricity, energy storage to
the battery! For solar
ligths and lanterns work.
2.International test conditions of photovoltaic panels:
AM1.5, 1000 w/m2/25
℃
AM1.5 is the actual distance light travels through the atmosphere
1.5 times the vertical thickness of the atmosphere.
25
℃
means charging at a temperature of 25
℃
.
3. 1000W/m2 is the radiation intensity of sunlight. Only when this intensity is reached can the photovoltaic
panel reach the maximum input current, otherwise it will not reach the maximum input current.
4.Autumn, winter and cloudy days, rainy days, the light intensity is relatively weak, charging effect will be
clear, significantly weakened, so the lighting time will be shortened, with the solar water heater.
Product self-inspection
If the lamp cannot be used, please try:
⑴
Check whether the connection line is well connected or flooded.
⑵
Check whether the wires at the photovoltaic panels and light fall off.
⑶
If there is no problem with the above two points, please contact
the local dealer.
Method of use
The lighting mode of this lamp is automatic mode:
⑴
When it's dark, it lights up automatically.
Daybreak, automatic lights off.
Product warranty
Thank you very much for purchasing our solar light. It is our obligation to provide you with quality products
and service, and fully protect your consumer rights and interests. Therefore, according to the relevant
national regulations, our
company implements the following warranty service terms:
1. Service commitment: All our solar lamps enjoy the service of "one-month replacement and one-year
warranty".
2. All exchange conditions: Since the date of purchase within a month, the inspection of our company is the
quality of the product itself, unconditional replacement of the same type of products, round-trip freight
borne by our company. If there is no problem or man-made damage
after testing, the round-trip freight
shall be borne by the customer,
and the maintenance fee shall be charged.
3. Warranty Regulations:
Since the date of purchase can enjoy a free warranty within a
year back and forth
freight borne by our company, such as the
detected product no problem or man-made damage, back and
forth freight borne by the customer and charge maintenance costs.
⑴
The appearance of the product damage is not to say that the
replacement policy.
⑵
Product accessories and gifts do not belong to the scope of
replacement, warranty or repair.
⑶
Customers can enjoy after-sale service by presenting the warranty
card and the purchase certificate.
4. In the following cases, the warranty will automatically expire, and
the company will only provide
maintenance services:
⑴
The warranty card or purchase voucher is lost, altered or dated.
⑵
Due to natural disaster, artificial or improper operation and other
non-product fault.
⑶
The product has been repaired, disassembled or modified by
personnel not authorized by our company.
⑷
The appearance of the product is seriously damaged or cannot
be identified.
⑸
Overrun the repair period.
WALL MOUNTING ACCESSORIES
Diam.: 45mm
Diam.: 45mm
Catalogue number: 98POLE45P
POLE MOUNTING ACCESSORIES
Catalogue number: 98POLE45
2.
Remote control function introduction
ON
OFF
W
Y
3H
3+3
5H
4+4
8H
4+6
AUTO
Steady on for 3 hours
Steady on for 8 hours
Half bright
Full brightness
Steady on for 5 hours
Brightness increase
Brightness reduc on
Turn on
Turn o
ff
factory data reset
(
Steady on mode for 12 hours)
1. Conven onal remote control
2. Radar induc on mode remote control
First, Full brightness 4 hours then
Radarmode for the next 8 hours
First, Full brightness 2 hours then
Radarmode for the next 6 hours
Brightness increase
Brightness reduc on
Turn ON
(
Induc on mode for 12 hours)
Turn OFF
factory data reset
(
Steady on mode for 12 hours)
OFF
Radar/ON
2+6/3H
+
3+7/5H
-
4+8/8H
12H/Reset
KYJQ-0608
Solar controller
First, Full brightness 3 hours then
Radarmode for the next 7 hours
Important note
1. Please do not arbitrarily change the circuit/circuit board.
2. Please pay attention to the installation and fixation of the lights, so as not to hurt people when the wind
blows.
3.Please do not disassemble the lamp, so as not to affect the
warranty.
4. In order not to affect the use effect of the lamps
，
please clean up the dust and debris on the surface of
the photovoltaic panel regularly.
5. Please check regularly whether the wire has fallen off or broken.
6. The solar lamps contain lithium batteries. Lithium batteries are recyclable items, so please do not throw
them away.
7.The battery must be fully charged before it can be used for more than 12 hours.