Before initial operation
© Elma Schmidbauer GmbH
BA_ES xtra ST_EN_Vers.08.2016
19
5.2
Connecting the unit to the mains
Ensure that the local connection details correspond to the data
indicated on the nameplate. See also Technical details (
Section
Connect the unit to a grounded shockproof socket only.
The mains plug must be connected to an easily accessible
socket only, as it serves as interrupted device!
As the units do not have any main switch, they can be supplied
with power individually or in groups via a main switch.
The units must only be disconnected from the mains power
supply when they are in standby mode.
If peripheric units from third party providers have to be supplied
with power, this must be done using separate switching
devices.
Required mains
conditions
Connect mains cable
Mains power supply
via main switch
