© Elma Schmidbauer GmbH
BA_Elmasonic EASY_EN_Vers. 03.2016
27
8.3.7
Industry and workshop
Cleaning concentrate (alkaline)for electronics and fine optics:
removes light oils, grease, fluxing agents, dust, finger prints,
etc.
Intensive cleaner (ammoniacal) with brightening effect for
nonferrous and precious metals: removes grinding, polishing
and lapping media, grease, oil, etc.
Cleaning concentrate (alkaline) for iron, steel, stainless steel
and precious metals: removes punching oil, drawing grease,
soot, forge, grinding and polishing media, high-performance
cooling lubricants, etc.
Universal cleaning concentrate (alkaline): removes oil, grease,
soot, coking, forge, dust, finger prints, etc.
Powerful cleaner (alkaline) in powder form for iron and light
metals: removes forged and gummed oil and grease, grinding
and polishing media, lacquer and paint remnants, wax, etc.
Neutral cleaning concentrate: removes oil, grease, grinding,
lapping and polishing media, dust, sweat, finger prints, etc.
Mild acid cleaning concentrate: removes rust, lime, oxide films
(e.g. verdigris), grease, oil, etc.
Strong acid cleaning concentrate: removes mineral
contaminations such as lime, rust and other oxides, films that
can be removed with corrosives, etc.
9
Maintenance
9.1
Maintenance / Care
Pull the mains plug before carrying out any maintenance
works!
The present Elmasonic EASY unit is maintenance-free.
Check the casing and the mains cable for damage regularly in
order to prevent electrical accidents.
Lime deposits on the stainless-steel tank can be cleaned gently
e.g. with elma clean 40 or elma clean 115C (operate the unit
with conce water).
Check regularly the grid of the air fan at the bottom of the unit
(not existent in all units).
Remove dirt if necessary to allow sufficient ventilation inside the
unit.
Residues of cleaning media can be wiped away with a
household cleaner or decalcifier depending on the kind of
contamination.
Do not put the unit in or under water!
If the unit is used for medical and sanitary purposes it is
necessary to disinfect the transducer tank and the surfaces
regularly (standard surface disinfectants).
elma tec clean A1
elma tec clean A2
elma tec clean A3
elma tec clean A4
elma tec clean A5
elma tec clean N1
elma tec clean S1
elma tec clean S2
ATTENTION
Electrical security
Care of transducer
tank
Grid of air fan
Care of casing
Disinfection