Elma Cyclomotion, Operating Instructions Manual

Page: 4 / 24

Safety warnings
4
BA_Cyclomotion_EN_Vers.09.2019 © Elma Schmidbauer GmbH
2.2 Instructions for the use of the unit
The present Cyclomotion or Cyclomotion pro unit has been
designed for the winding up of mechanic (automatic) watches
only.
Operation of the unit by authorized and instructed staff only.
Observe the instructions given in the present manual.
Check the Cyclomotion and the power supply unit for transport
damages. In case of visible damage do not operate the unit!
In order to move the Cyclomotion to another place hold the unit
by the handle on the rear and the foot. Do not lift and carry the
Cyclomotion by the acrylic glass hood.
Place the unit on a dry and solid surface. Ensure that the
workplace is sufficiently ventilated and keep workplace and unit
dry.
Allowed ambient temperature: +5° to +30°.
For safety reasons, the present unit must be connected to a
correctly grounded socket only. The technical details indicated
on the nameplate must correspond with the available mains
connection details, in particular those of the mains voltage and
current connected value.
If the Cyclomotion and/or the mains cable are damaged do not
connect the unit to the mains!
The unit must be opened by authorised and specialised staff
only.
For cleaning the acrylic glass hood (Cyclomotion pro) use
cleaning media that are suitable for acrylic glass surfaces and
ensure that the acrylic glass hood cannot be scratched.
Intended use
User
Check for transport
damages
Transportation
Placement
Mains connection
Prevention of
electrical accidents