Elma Cyclomotion, Operating Instructions Manual

Page: 13 / 24

Product description
© Elma Schmidbauer GmbH BA_Cyclomotion_EN_Vers.09.2019
13
3.10.2 Combination examples
You want to wind up 12 watches with straps; the watches are
wound in both directions. In this case you can mount e.g. 6x
„watch clip 2“.
You want to wind up 24 watches with straps; the watches are
wound in one particular direction. In this case you can mont e.g.
6x „watch clip 4 left/right“.
You want to wind up 18 watches: 14 watches are with straps, 4
watches are without straps. 10 of the 14 watches are wound in
both directions, 4 watches are wound in right direction only.
Equip your Cyclomotion with the
„Elma Watch box“ for the 4
watches without straps; with one „watch clip 2“ and 2x with
„watch clip 4“ for the 10 watches that are wound in both
directions; and 2x with „watch clip 2 left/right“ for the 4 watches
that are wound in right direction only. Set the sense of rotation
to “right” (
see section 6 ).
You want to wind up 12 watches: 9 watches are with straps, 3
watches are without straps. 3 of the 9 watches are wound in
both directions; 3 watches are wound in right direction only; 3
watches are wound in left direction only. Equip your
Cyclomotion with
the “Elma Watch box” for the 3 watches
without straps; 2x with “watch clip 2” for the 3 watches that are
wound in both directions; and with 3x “watch clip left/right” for
the remaining 6 watches that are wound in one direction only.
Activate the automatic change of the sense of rotation (
see
section 6 ) to ensure that all watches are wound up.
You can wind up watches that are wound in both directions and
watches that are wound in one direction only at the same time.
Ensure that you set the correct sense of rotation on your
Cyclomotion (
see also section 6 ).
You would like to wind watch movements on the Cyclomotion.
Clamp this
in a plastic calotte in the "industry clamp 4
”
Example 1
Example 2
Example 3
Example 4
Example 5