2601/2610/2650/2680
side 24
Measuring mode „ZERO“:
In the measuring mode „ZERO“, the zero-point can be adjusted at
will and anytime.
Press Menu-key
.
Measuring mode „UNIT“:
Depending on the measuring mode the measuring units can be selected with the
menu key
.
Measuring mode „AUTO“:
In the measuring mode “AUTO” (Auto-Range) the best possible display of the reading is
pre-selected. Thereby, the resolution will be adjusted or reduced as the measured variable
increases. (only available in S2601,S2610 and S2650)
Additionally, the desired reading display can be preset manually through the Menu-key
, so that for instance irrelevant digits behind the comma are not shown.
